|
DTA Sound Suppressors
Dealers E-mail us for our T&E/Demo Program we offer on our Nano Suppressor
Multi Caliber Suppressor:
Nano (Narrow Aperture
Noise Obliterator )
100% Titainium
Shown on a Sig P238 in .380 and DTA Business Card For Size Comparision
Length=
4"
Diameter= .98"
Weight= 3.1 ounces
Material= 100% Titanium
Suppressor Finish= Satin Bead Blast and YAG Laser Engraved. (Optional finishes at available at extra cost)
Baffle Stack = Mono Core Design
Maintenance= Can Be Fully Disassembled for cleaning
Extra Suppression=
Use of Optional Wipes
Calibers= .17HMR, .22 short, .22lr, .22 Mag, 5.7x28mm, .380, 9mm, and many others
Threads Mount= 1/2" -
28TPI, 13.5-1mm LH , and Custom Theads Available at Extra Cost
Full Auto Rated= Yes, but
excessive full auto use that causes increased wear on both gun and suppressor is
not recommended.
PRICE=
$600
9mm Suppressors:
DeGroat Tactical Armaments, LLC. received a
Military/Government Order to design and manufacture three different models of 9mm suppressors, which
went to Iraq for combat use. While we were in the process of filling
that order we manufactured extra parts so we could also offer these
suppressors to the Civilian and Law Enforcement market.
Mk 99 Mod 0:
Built for use on all 9mm weapons requiring a booster like Glock, Sig, Walther, and
etc.
 
Booster Designed By: DeGroat Tactical Armaments, LLC.
  
Length=
7.30"
Diameter= 1.25"
Weight=
9.2 ounces
Material= Aircraft Grade
Aluminum and Heat Treated Stainless Steel
Suppressor Finish= Type III
Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type
III Hard-Coat Anodized (green)
Blast Baffle= Stainless
Steel
Blast Chamber=
Stainless Steel
Booster= 100% Heat Treated
17-4PH Stainless Steel, Integrated Booster Design, 10 Point of Impact (POI)
Adjustments, O-ring sealed design, No Tools needed for maintenance,
interchangeable piston (for mounting on weapons with different thread pitches),
strongest booster and most unique booster on the market, 100% designed and
manufactured by
DeGroat Tactical Armaments, LLC. Patent Pending
Threads Mount= 1/2" -
28TPI, Stainless Steel. Only thing required to have a different thread
pitch is to replace the booster piston with another one, which only takes a
matter of seconds. Extra pistons available in 1/2" - 32TPI, 1/2" - 36TPI,
and 13.5-1mm LH at $65 each
Full Auto Rated= Yes, but
excessive full auto use that causes increased wear on both gun and suppressor is
not recommended.
PRICE=
E-mail
Mk 9 Mod 0:
Built for the Beretta M9 and 92 Series of Pistols.
 
 
Length= 6.95""
Diameter= 1.25"
Weight=
5.9 ounces
Material= Aircraft Grade
Aluminum and Stainless Steel
Suppressor Finish= Type III
Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type
III Hard-Coat Anodized (green)
Blast Baffle= Hard-Anodized
Aluminum
Blast Chamber=
Hard-Anodized Aluminum
Threads Mount=1/2" - 28TPI,
Engraved Aluminum rear cap with a Stainless Steel thread insert.
Full Auto Rated= NO
PRICE=
E-mail
NAVY 9:
Built for the MP-5N (NAVY Models)
Length= 7.92"
Diameter= 1.25"
Weight=
7.8 ounces
Material= Aircraft Grade
Aluminum and Stainless Steel
Suppressor Finish= Type III
Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type
III Hard-Coat Anodized (green)
Blast Baffle= Stainless
Steel
Blast Chamber=
Stainless Steel
Threads Mount= 1/2" - 32TPI
or 1/2" - 28TPI (your choice), rear cap made from Stainless Steel.
Full Auto Rated= Yes, but
excessive full auto use that causes increased wear on both gun and suppressor is
not recommended.
PRICE=
E-mail
Mk 12 D.E.L.T.A (DeGroat Extended
Length Tactical Attenuator)
with DTA booster
Shown on a Beretta M9 with a Mk 99 Mod 0 underneath for size comparison.
Length=
12"
Diameter= 1.25"
Weight= less than 14 ounces ounces (exact weight TBD)
Material= Aircraft Grade
Aluminum and Heat Treated Stainless Steel
Suppressor Finish= Type III
Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type
III Hard-Coat Anodized (green)
Blast Baffle= Stainless
Steel
Blast Chamber=
Stainless Steel
Booster= 100% Heat Treated
17-4PH
Stainless Steel, Integrated Booster Design, 10 Point of Impact (POI)
Adjustments, O-ring sealed design, No Tools needed for maintenance,
interchangeable piston (for mounting on weapons with different thread pitches),
strongest booster and most unique booster on the market, 100% designed and
manufactured by
DeGroat Tactical Armaments, LLC. Patent Pending
Threads Mount= 1/2" -
28TPI, Stainless Steel. Only thing required to have a different thread pitch is
to replace the booster piston
with another one, which only takes a matter of seconds. Extra pistons available
in 1/2" - 32TPI, 1/2" - 36TPI, and 13.5-1mm LH at $65 each
Full Auto Rated= Yes, but
excessive full auto use that causes increased wear on both gun and suppressor is
not recommended.
PRICE=
E-mail
Mk 12 D.E.L.T.A (DeGroat Extended
Length Tactical Attenuator) with fixed mount
Built for fixed barrel weapons like an AR-15 with 9mm conversion and other custom 9mm
setups, basically same suppressors as the NAVY 9 but longer, more baffles, and
quieter.
Length= 12""
Diameter= 1.25"
Weight= 11.5 ounces
Material= Aircraft Grade
Aluminum and Stainless Steel
Suppressor Finish= Type III
Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type
III Hard-Coat Anodized (green)
Blast Baffle=
Stainless Steel
Blast Chamber=
Stainless Steel
Threads Mount= 1/2" - 32TPI
or 1/2" - 28TPI (your choice), rear cap made from Stainless Steel.
Full Auto Rated= Yes, but
excessive full auto use that causes increased wear on both gun and suppressor is
not recommended.
PRICE=
E-mail
Shipping on Suppressors is $10 and they will ship by UPS
Other forms of shipping are also available
Payment Terms:
All forms of payment are accepted: Checks, Money Orders,
and Credit Cards +3%
A signed copy of your or your dealers FFL/SOT is required to start
transfer.
Suppressors will transfer on a tax free Form 3 to FFL/SOT holders. If you live in
New Mexico we can process your Form 4 free of charge (you still have to pay the
$200 to the BATFE for the tax stamp).
Nano Suppressors are in stock and ready to transfer!
We are currently sold out on some models
Warranty Information:
If any suppressor is proven to have a manufacturer defect, send it back and we
will fix or replace the suppressor free of charge. If the suppressor
becomes damaged or requires servicing, send it back and we will service or
replace the
suppressor for 25% of the listed price.
We recommend using FACTORY threaded barrels or having
Tornado Technologies
thread your barrel. We also suggest having Tornado Technologies check your
factory barrel to confirm and ensure the threading to be concentric with the
bore, otherwise baffle strikes may occur. DTA is not liable for any baffle
strikes, but can repair the suppressor for 25% of the list price of the
suppressor. DTA does not stock or supply threaded barrels. DTA not offer barrel threading service at this time, all barrels requiring threading should be sent to Tornado
Technologies.
The Magnuson-Moss Act
(public Law 93-637) does not require any seller or manufacturer of a consumer
product to give a written warranty. It does provide that if a written warranty
is given, it must be designated as �limited� or as �full� and sets minimum
standards for a �full� warranty. DTA has elected not to provide any written
warranty, either �limited� or �full�, rather than to attempt to comply with the
provisions of the Magnuson-Moss Act and the regulations issued there under.
There are certain implied warranties under state law with respect to sales of
consumer goods. As the extent and interpretation of these implied warranties
vary from state to state you should refer to your state statutes.
Dealer Prices Available
If you have any questions or would like to place an order please contact us at:
Sales@ArmamentSales.com
Videos:
Mk 99 Mod 0 and Mk 9 Mod 0 Video
(Right Click Here & Save Target As 61.8mb)
Mk 99 Mod 0 and Mk 9 Mod 0 Video Low Res
(Right Click Here & Save Target As
10.29mb)
Mk 99 Mod 0 Fired on Full Auto Glock
(Right Click Here & Save Target As
2.81mb)
Mk 12 D.E.L.T.A Fired on Beretta M9 with KAC Slide Lock
(Right Click Here & Save Target As
3.8mb)
CNC Machining of Mk 9 Mod 0 Tube for Front End Cap
(Right Click Here & Save Target As
7.47mb)
Click Here For Higher Res Pictures
(More pictures will be added soon.)
| 
